Axis Status Registers Pane

To access this pane:
On the RMCTools toolbar, click the Axis Tools button . If the Axes Status Registers pane does not appear, use the Select Layout box to choose the Axes Status Registers pane, or press F6.

The Axis Status Registers pane is part of the Axis Tools pane. It displays the Axis Status registers. This data is very useful in all phases of using the controller.

Tabs

The Axis Parameters pane has 2 tabs. Within each tab, the registers are arranged in sections. To expand a section, clicking the '+'.

Basic Tab
Use this tab to view the basic status registers for an axis.
All Tab
Use this tab to view all the status registers. This tab is useful for advanced troubleshooting.

Using the Axis Status Registers Pane

Columns

Column Name	Description
Registers	This is the descriptive name of the parameter register, along with the units.
Reg #	The Reg# column contains the address number for each register. The addresses apply to the selected axis. To change the address format, right-click any cell in the Reg # column, choose Address Formats, and choose the desired format.
Axis	This is the current value for this axis of the register in the Reg # column.

Hiding and Showing Columns

To hide a column, right-click the column heading and click Hide Column. To see it again, right-click any column heading, click Add Column, and click the desired column name.