Scale/Offset Wizard Overview

The Scale/Offset wizards help you calculate the Scale an Offset parameters. For details on the function of the Scale and Offset parameters, see the Scaling Overview topic.

Accessing the Scale/Offset Wizards

To open a Scale offset Wizard, open Axis Tools. In the Axes Parameters Pane, click the Setup tab. Expand the Tools and Wizards section. Click Launch to open the Scale/Offset Wizard.

Notice that before using the Scale/Offset Wizard, you must define the axes and configure the axis type.

Scale/Offset Wizards

Below is a list of the Scale/Offset Wizards available in RMCTools.

SSI Scale and Offset

MDT Scale and Offset

Quadrature Scaling

Resolver Scale and Offset

Rotary Scale and Offset

Pressure/Force Scale and Offset

Differential Force Scale and Offset for a Hydraulic Cylinder

Differential Force Scale and Offset for a Hydraulic Motor

Generic Scale and offset Using the Position/Counts Method

Scaling Specific Axis Types:

Analog Position Scaling

Analog Velocity Scaling

Analog Acceleration Scaling

Analog Pressure/Force Scaling

MDT Scaling

SSI Scaling

Quadrature Scaling

Resolver Scaling

 

See Also

Scaling Overview | Analog Position Scaling | Analog Velocity Scaling | Analog Acceleration Scaling | Analog Pressure/Force Scaling | MDT Scaling | SSI Scaling | Quadrature Scaling | Resolver Scaling

---